STAFF ACTION

OFFICE: Transportation Inventory

STAFF ACTION NUMBER: S-02-1139

SUBMITTED BY: Peggi Knight

APPROVAL DATE: 06-13-2002

 

DISCUSSION/BACKGROUND:

 

New Description - Interstate 380 and its extensions in Benton County described as follows:

 

Beginning at the Benton-Linn County line at a point near the E Corner Section 1-T85N-R9W, Benton County (W Corner Section 6-T85N-R8W, Linn County); thence northwesterly through Section 1-T85N-R9W and Sections 36, 35, and 26-T86N-R9W to the east corporation line of Urbana, connecting with an unnamed street (at a point near the W Corner Section 26-T86N-R9W).

 

Urbana:

 

Beginning on an unnamed street at the east corporation line; thence northwesterly on said unnamed street to the west corporation line (approximately 720 feet south of the W Corner Section 22-T86N-R9W).

 

Beginning again on the west corporation line of Urbana connecting with an unnamed street; thence northwesterly through Sections 21, 16, 17, 8, 7, and 6-T86N-R9W and Section 1-T86N-R10W to the Benton-Buchanan County Line near the N Corner Section 1-T86N-R10W, Benton County (Section 36-T87N-R10W, Buchanan County).

 

PROPOSAL/ACTION RECOMMENDATION:

 

It is recommended that the old description of Interstate 380 and its extensions in Benton County be deleted and the new description be included in the Primary Road System.

 

 

 

 

STAFF ACTION

OFFICE: Transportation Inventory

STAFF ACTION NUMBER: S-86-445

SUBMITTED BY: Patrick R. Cain

APPROVAL DATE: 10-18-85

 

DISCUSSION/BACKGROUND:

 

Interstate 380 was completed, northwesterly, from Iowa 150 northwest of Urbana and opened to traffic on September 13, 1985. The official description of Interstate 380 in Benton County should be revised to reflect this opening.

 

Interstate 380 begins on the Benton‑Linn County Line approximately 2 miles southeast of Urbana and travels northwest to the Benton‑Buchanan County Line approximately 10 miles northeast of Vinton.

 

PROPOSAL/ACTION RECOMMENDATION:

 

It is recommended to approve revising the description of Interstate 380 in Benton County and including the new description in the Primary Road System.

 

New Description ‑ Interstate 380 in Benton County described as follows:

 

Beginning at the Benton‑Linn County Line at a point near the E Corner Section l‑T85N‑R9W, Benton County (W Corner Section 6‑T85N‑R8W, Linn County); thence northwest through Section l‑T85N‑R9W and Sections 36, 35, 26, 27, 22, 21, 16, 17, 8, 7 and 6‑T86N‑R9W and Section l‑T86N‑R10W to the Benton Buchanan County Line on the north line of Section l‑T86N‑R10W, Benton County (South line of Section 36‑T87N‑R10W, Buchanan County).

 

 

 

 

STAFF ACTION

OFFICE: Transportation Inventory

STAFF ACTION NUMBER: S-85-405

SUBMITTED BY: Patrick R. Cain

APPROVAL DATE: 10-18-84

 

DISCUSSION/BACKGROUND:

 

Interstate 380 was opened to traffic August 14, 1984. Its description should be included in the Primary Road System.

 

Interstate 380 begins on the Benton‑Linn County line approximately 2 miles southeast of Urbana and travels northwest to a junction with Iowa 150 approximately 1 miles northwest of Urbana.

 

PROPOSAL/ACTION RECOMMENDATION:

 

It is recommended to approve adding the description of Interstate 380 in Benton County to the Primary Road System.

 

New Description ‑ Interstate 380 in Benton County described as follows:

 

Beginning at the Benton‑Linn County line at a point near the E Corner section l‑T85N‑R9W, Benton County (W Corner section 6‑T85N‑R8W, Linn County); thence northwest through Section l‑T85N‑R9W and sections 36, 35, 26, 27 and 22‑T86N‑R9W to a point approximately 1750 feet north of the SW Corner section 22‑T86N‑R9W (junction Iowa 150).

 

REVISED 10-18-85