INSPECTION & ACCEPTANCE

ORANGE MESH SAFETY FENCE

 

GENERAL

Orange mesh safety fence shall meet the requirements of applicable Iowa Department of Transportation Specification 4188.03. Approved brand names are listed in the Materials Approved Products Listing Enterprise (MAPLE).

 

ACCEPTANCE

Acceptance of orange mesh safety fence is based on manufacturer and brand name approval.

 

MANUFACTURER & BRAND NAME APPROVAL

To obtain approval, the manufacturer shall submit the following to the Construction and Materials Bureau in Ames, Iowa:

 

1.   Product identification

2.   Technical information describing product and use of the product

3.   A full-width sample at least 4 ft.  long

 

CERTIFICATION

Approved products will remain approved unless changes to the product are made. In this case resubmittal of the product will be required.

 

MONITOR SAMPLING & TESTING

Samples may be secured from the project and tested to verify compliance.