(See Standard Road Plan RL-6) |
|
|||||||||||||||||||||||||||
COUNTY |
|
ROUTE |
|
|||||||||||||||||||||||||
PROJECT DESCRIPTION (FROM-TO) |
|
|
||||||||||||||||||||||||||
GRADING PROJECT NO. |
|
|
||||||||||||||||||||||||||
BRIDGE PROJECT NO. |
|
|
||||||||||||||||||||||||||
BRIDGE DESIGN NO. |
|
|
||||||||||||||||||||||||||
OTHER INFORMATION |
|
|
||||||||||||||||||||||||||
Benchmark and Elev. |
|
|
||||||||||||||||||||||||||
Settlement Plate No. |
|
Station |
|
Offset (R/L) |
|
|||||||||||||||||||||||
Elevation of top of plate as initially installed |
900.50 |
|
||||||||||||||||||||||||||
Date plate installed |
5/17/2002 |
|
Date fill completed |
|
|
|||||||||||||||||||||||
Date Read |
Fill Elev. at Riser |
Fill Height |
Length of Risers Added |
Elev, Top of Riser |
Today's Plate Elev. |
Current Settlement |
Total Settlement |
Remarks or other information |
||||||||||||||||||||
Today |
To Date |
|||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
05/17/02 |
900.50 |
0.00 |
4.00 |
4.00 |
904.50 |
900.50 |
0.00 |
0.00 |
|
|||||||||||||||||||
05/24/02 |
901.50 |
1.00 |
0.00 |
4.00 |
904.50 |
900.50 |
0.00 |
0.00 |
|
|||||||||||||||||||
05/31/02 |
902.50 |
2.00 |
0.00 |
4.00 |
904.49 |
900.49 |
0.01 |
0.01 |
|
|||||||||||||||||||
06/07/02 |
903.50 |
3.00 |
3.00 |
7.00 |
907.47 |
900.47 |
0.02 |
0.03 |
|
|||||||||||||||||||
06/14/02 |
905.00 |
4.50 |
0.00 |
7.00 |
907.43 |
900.43 |
0.04 |
0.07 |
|
|||||||||||||||||||
|
||||||||||||||||||||||||||||
FOR THE EXAMPLE SHOWN ABOVE: |
||||||||||||||||||||||||||||
Date Read: |
Start at day zero to get initial survey shots on the risers attached to the plate when installed. |
|||||||||||||||||||||||||||
Fill Elev. At Riser: |
Shoot the fill elevation adjacent to the riser pipe at time of reading. |
|||||||||||||||||||||||||||
Fill Height: |
Difference between current fill elevation and original ground elevation; use top of plate as ground elev. if reasonable |
|||||||||||||||||||||||||||
Risers Added Today: |
Standard pipe extensions are 3'-0" (see Standard RL-6) but installed length varies with couplers in place. |
|||||||||||||||||||||||||||
Measure length directly on the pipe, from top of old coupler to top of new coupler. |
||||||||||||||||||||||||||||
CHECK this length against a SAME-DAY difference in elevations before/after adding the new riser. |
||||||||||||||||||||||||||||
Risers Added To Date: |
Sum the lengths of all riser pipes placed to date; = distance from top of plate to top of last riser. |
|||||||||||||||||||||||||||
Elev, Top of Riser: |
It is recommended this always be read at the top of an attached coupler. |
|||||||||||||||||||||||||||
Today's Plate Elev: |
This is the elevation of the current top of riser pipe minus the exact length of all risers to date. |
|||||||||||||||||||||||||||
Current Settlement: |
Change in plate elevation from the previous reading. |
|||||||||||||||||||||||||||
Total Settlement: |
Change in plate elevation from its original elevation at base of fill. |
|||||||||||||||||||||||||||
Remarks: |
Note any damage, out-of-plumb, resetting, etc. |
|||||||||||||||||||||||||||