INSPECTION & ACCEPTANCE

PRISMATIC REFLECTORS

 

GENERAL


Prismatic reflectors to be used for various types of delineation shall meet the requirements of Article 4186.11. Plastic backed reflectors are for temporary use only. Aluminum backed reflectors are for either temporary or permanent use. Approved Products are listed in the Materials Approved Products Listing Enterprise (MAPLE).

 

ACCEPTANCE

Acceptance of prismatic reflectors for use on Iowa Department of Transportation projects will be on the basis of manufacturer and brand name approval.

 

MANUFACTURER & BRAND NAME APPROVAL

To obtain approval for prismatic reflectors under Appendix A, the manufacturer shall submit the following items to the Office of Materials in Ames, Iowa:

 

1.   Product identification including brand name and product number

 

2.   Complete manufacturer recommendations for usage

 

3.   Product samples consisting of:

 

a.   Post Mounted Delineators - 50 each color

 

Approval of prismatic reflectors may be withdrawn because of deficient monitor test results; product changes made after original approval, or unsatisfactory field performance.

 

MONITOR SAMPLING & TESTING

The Office of Materials may sample and test prismatic reflectors to verify compliance with specifications.