INSPECTION & ACCEPTANCE

OF POURED JOINT SEALERS

 

GENERAL


Poured joint sealers (both hot-poured and cold-poured) shall meet the requirements of applicable Iowa Department of Transportation specifications (4136.02, Paragraph A).

 

ACCEPTANCE

Acceptance of poured joint sealers for use on Iowa Department of Transportation projects will be on the basis of manufacturers and product name approval. Approved Brands are listed in the Materials Approved Products Listing Enterprise (MAPLE)

 

MANUFACTURER AND BRAND NAME APPROVAL

To obtain approval, the manufacturer shall submit the following to the Iowa Department of Transportation, Office of Materials, 800 Lincoln Way, Ames, Iowa 50010.

 

1.     Product identification including brand name and product number

 

2.     Technical literature and MSDS for the product

 

3.     AASHTO National Transportation Product Evaluation Program (NTPEP) evaluation report for the product.

 

MONITOR SAMPLING

The Office of Materials may sample a batch at the job site, supplier, or source and test to verify compliance with the specifications.