TABLE E |
|
|
|
PRICE ADJUSTMENT FOR OUT-OF-TOLERANCE TINING |
|
|
|
Average Tining Depth |
Percent Payment |
|
|
Less than 1/16 inch |
Diamond grind or groove |
(Less than 1.5 mm) |
|
|
|
1/16 up to 3/16 inch |
100% |
(1.5 up to 4.5 mm) |
|
|
|
Over 3/16 up to 5/16 inch |
95% or diamond grind * |
(Over 4.5 up to 8 mm) |
|
|
|
Over 5/16 up to 3/8 inch |
90% or diamond grind * |
(Over 8 up to 10 mm) |
|
|
|
Over 3/8 inch |
Diamond grind only * |
(Over 10 mm) |
|
|
|
* The pavement surface may be diamond ground to reduce the depth of grooves to within specification tolerances.
Note: Area of price adjustment will be calculated using measured length and nominal pavement width.
|