Model Name (English) |
Description |
TRRCB-G1-01 |
General Information for Triple Reinforced Concrete Box Culvert Standards |
TRH 0-1-01 |
Dimension Table - 0° Skew |
TRH 0-2-87 |
Curtain Wall Details and Plain View - Apron Reinforcing,
Top & Bottom |
TRH 0-3-01 |
Typical Section - Near Center of Apron, Curtain Wall
Plan and Section and Details |
TRH 0-4-01 |
Typical View - Front and Back Face Reinforcing,
Wingwalls, Center Walls |
TRH 0-5-01 |
Bent Bar Details and Bill of Reinforcing for One
Headwall 0° Skew, 10'-0 and 12'-0 Spans |
TRH 15-1-01 |
Dimension Table 15° Skew |
TRH 15-2-01 |
Typical Section - Near Center of Apron, Section thru
Parapet, Top of Wingwall Details and Curtain Wall Details |
TRH 15-3-01 |
Typical Section - Near Center of Apron, Curtain Wall
Plan and Section and Details |
TRH 15-4-01 |
Typical View - Front & Back Face Reinforcing, Wingwalls,
Center Wall |
TRH 15-5-01 |
Bent Bar Details, Bill of Reinforcing for One Headwall,
15° Skew - 10'-0 & 12'-0 Spans |
TRH 30-1-01 |
Dimension Table - 30° Skew |
TRH 30-2-01 |
Plain View - Apron Reinforcing Top & Bottom |
TRH 30-3-01 |
Typical Section - Near Center of Apron, Curtain Wall
Plan and Section and Details |
TRH 30-4-01 |
Typical View - Front & Back Face Reinforcing, Wingwalls,
Center Wall |
TRH 30-5-01 |
Bent Bar Details and Bill of Reinforcing for One Headwall,
30° Skew - 10'-0 & 12'-0 Spans |
TRH 45-1-01 |
Dimension Table - 45° Skew |
TRH 45-2-01 |
Plain View - Top of Apron Reinforcing |
TRH 45-3-01 |
Plain View - Bottom of Apron Reinforcing |
TRH 45-4-01 |
Typical Section - Near Center of Apron, Curtain Wall
Plan and Section and Details |
TRH 45-5-01 |
Typical View - Front & Back Face Reinforcing, Wingwalls,
Center Walls |
TRH 45-6-01 |
Bent Bar Details and Bill of Reinforcing for One Headwall,
45° Skew - 10'-0 & 12'-0 Spans |
|
|
Model Name (Metric) |
Description |
MTRRCB-G1-94 |
General Information for Triple Reinforced Concrete Box Culvert Standards |
MTRH 0-1-94 |
Dimension Table |
MTRH 0-2-94 |
Plain View - Apron Reinforcing, Top and Bottom |
MTRH 0-3-94 |
Typical Section - Near Center of Apron, Curtain Wall
Plan and Section and Details |
MTRH 0-4-94 |
Typical View - Front & Back Face Reinforcing, Wingwalls,
Center Wall |
MTRH 0-5-94 |
Bent Bar Details and Bill of Reinforcing for One Headwall,
0° Skew - 3000 mm and 3600 mm Spans |
MTRH 15-1-94 |
Dimension Table |
MTRH 15-2-94 |
Plain View - Apron Reinforcing, Top & Bottom |
MTRH 15-3-94 |
Typical Section - Near Center of Apron, Curtain Wall
Plan and Section and Details |
MTRH 15-4-94 |
Typical View - Front & Back Face Reinforcing, Wingwalls,
Center Wall |
MTRH 15-5-94 |
Bent Bar Details and Bill of Reinforcing for One Headwall,
15° Skew - 3000 mm & 3600 mm Spans |
MTRH 30-1-94 |
Dimension Table |
MTRH 30-2-94 |
Plain View - Apron Reinforcing, Top & Bottom |
MTRH 30-3-94 |
Typical Section - Near Center of Apron, Curtain Wall
Plan and Section and Details |
MTRH 30-4-94 |
Typical View - Front & Back Face Reinforcing, Wingwalls,
Center Wall |
MTRH 30-5-94 |
Bent Bar Details and Bill of Reinforcing for One Headwall,
30° Skew - 3000 mm & 3600 mm Spans |
MTRH 45-1-94 |
Dimension Table |
MTRH 45-2-94 |
Plain View - Top Apron Reinforcing |
MTRH 45-3-94 |
Plain View - Bottom Apron Reinforcing |
MTRH 45-4-94 |
Typical Section - Near Center of Apron, Curtain Wall
Plan and Section and Details |
MTRH 45-5-94 |
Typical View - Front & Back Face Reinforcing, Wingwalls,
Center Wall |
MTRH 45-6-94 |
Bent Bar Details and Bill of Reinforcing for One Headwall,
45° Skew - 3000 mm & 3600 mm Spans |