#------------------------------------------------------------------
#
# RoadDesign.cfg - Configuration variables for the Office of Design
#
# Written 09/10/04 by Wayne Mander - Initial V8 Conversion
#
# Note: MSDESIGN is set in the Highway.cfg as w:\highway\Design\\
#
#------------------------------------------------------------------

%level 2

MS_RFDIR > W:\Highway\Bridge\Cadd\Seedfiles\\
MS_RFDIR > W:\DOTCadd\Seedfiles\Bridge\\
MS_RFDIR > W:\Highway\Design\CADD\MicroStation\SeedFiles\OrigFiles\\
MS_RFDIR > W:\Highway\Design\CADD\MicroStation\SeedFiles\OrigFilesV7\\
MS_RFDIR > W:\Highway\Design\RoadDesignDetails\\
MS_RFDIR > W:\Highway\Design\CADD\Geopak\Sheeting\Sheet Ref Files\Resolution 720-2000\EngSheetRefs\\
MS_RFDIR > W:\Highway\Design\CADD\Geopak\Sheeting\Sheet Ref Files\Resolution 720-2000\MetSheetRefs\\
MS_RFDIR > W:\Highway\Design\CADD\Geopak\Sheeting\Sheet Ref Files\Resolution 10000\EngSheetRefs\\
   #---- Reference File Paths not set in Highway.CFG file                  ----#

MS_CELL < $(MSDESIGN)CADD\MicroStation\Cells\\
   #----  Prepends the path for Office of Design specific Cell Libraries   ----#

MS_CELLLIST = $(MSDESIGN)CADD\MicroStation\Cells\*.cel
   #----  List of Cell Libraries to search for cells                       ----#

MS_COMPRESS_USER_PREFS = 1
   #----  Compresses the UPF file if it gets over 500K in size             ----#

MS_MONITOR_USER_PREFS = 1
   #----  Monitors the UPF file for errors and repairs if possible         ----#

MS_FULLPATHINTITLEBAR = 1
   #----  Displays the full path of the file in the MicroStation Title Bar ----#

MS_IDLETIMEOUT = 0
   #----  Prevents MicroStation from exiting, regardless of length of idle ----#

MS_LEVEL_AUTO_SYNC_ATTRIBUTE_LIST = ByLevelSymbology
   #----  Automatically synchronizes the ByLevel attributes in a local     ----#
   #----  file to match the attributes that were set in the level library  ----#

MS_MACRO = $(MSDESIGN)CADD\MicroStation\Basic\\
   #----  Sets the path for Office of Design MicroStation Basic macros     ----#

MS_MAINMENUDOCKINGBESIDE = 1
   #----  Allows toolboxes to be docked beside the Main Menu Bar           ----#

MS_ODBCPARAMS=FILEDSN=$(MSDESIGN)OfficeInformation\Equipment\DatabaseCDR\design.dsn
   #----  Path to FileDsn for database connection to equipment map         ----#

#----MS_PENTABLE = $(MSDESIGN)CADD\MicroStation\Plotting\PenTables\\   COMMENTED OUT ON 05-31-07 WCM
   #----  Location for MicroStation Plotting Pen Tables                    ----#

#----MS_PLOTDLG_DEF_PENTABLE = RoadDesign.pen                          COMMENTED OUT ON 05-31-07 WCM
   #----  Name of default pen table loaded when Plot Dialog box opens      ----#

MS_PLTR = W:\DOTCadd\PlotDrivers\printer.plt			       CHANGED ON 05-31-07 WCM
   #----  Location of default MicroStation Printer Driver                  ----#

MS_RASTER_SAVEAUTO = 1
   #----  Enables Raster Manager Automatic Save mode, which automatically  ----#
   #----  saves changes made to a raster, instead of using save settings   ----#

MS_REFCOLORTABLE = 0
   #----  Forces all reference files to display with the same color table  ----#
   #----  as the one attached to the active file - Same as in preferences  ----#

MS_SEEDFILES = $(MSDESIGN)CADD\MicroStation\SeedFiles\\
   #----  Default path for Design seed files                               ----#

MS_DESIGNSEED = dsnSeedEng2D.dgn
   #----  Default Design seed file                                         ----#

MS_SPELLINGLANGUAGE = AmericanEnglish
   #----  Default spelling language (was taken from initial UCF file       ----#

MS_USERPREFSEED = $(MSDESIGN)CADD\MicroStation\Config\RoadDesign.upf
   #----  Default seed file for User Preference File                       ----#

#----MS_VBAAUTOLOADPROJECTS = AutoRun				COMMENTED OUT ON 03-07-07 WCM
   #----  VBA projects that autoload/run when MicroStation starts          ----#

MS_VBANEWPROJECTDIRECTORY = $(MSDESIGN)CADD\MicroStation\VBA\\
   #----  Default location to create new VBA macro projects                ----#

MS_VBASEARCHDIRECTORIES < $(MSDESIGN)CADD\MicroStation\VBA\\
   #----  Default location to load existing VBA macro projects             ----#

MS_VBA_OPEN_IN_MEMORY = READONLY
   #----  Allows read-only macros to be read into memory so that the limit ----#
   #----  of 20 concurrent users of the macro file is not reached          ----#



_USTN_CUSTOMIZEBASEID = 10001
   #----  Prevents the resource identifer for any given resource file from ----#
   #----  being set no lower than the stated value (pertains to ustn.m01)  ----#

_USTN_DISPLAYALLCFGVARS = 1  
   #----  Allows ALL variables to list, while in MicroStation, including   ----#
   #----  those with a leading "underbar", which are normally hidden.      ----#

_USTN_UISTANDARDS = W:\Highway\Design\CADD\MicroStation\Config\WSUI\RoadDesign\\
   #----  Added 12-29-05 DLO
   #----  This variable is used as part of the _USTN_UIPATH (User Interface
   #----    Path) definition, which is set in the msconfig.cfg system file.
   #---- 
   #----  Path for the "RoadDesign Master" User Interface directory        ----#
   #----  location, which prepends the local "wsui" directory location.    ----#

_USTN_UIPATH < $(MSDESIGN)CADD\MicroStation\Config\WSUI\$(_USTN_USERINTNAME)\\\
   #----  Path for the "master" User Interface directory location, which   ----#
   #----  prepends the local "wsui" directory location.                    ----#

GPK_ACBOOK_DDBFILE = $(MSDESIGN)CADD\Geopak\DCManager\DesignV8.ddb
   #----  Location of D & C Manager database                               ----#

GPK_BOREHOLE_GTPFILE = $(MSDESIGN)CADD\Geopak\GeoTechPrefs\EnglishDigHolePrefs.gtp
   #----  Location and name of the default Geopak GeoTech Preferences file ----#

GPK_NOAUTOACTIVATE = 1
   #----  Requires Geopak to be activated every time MicroStation starts   ----#

GPK_SHEETCLP_SHEET_CELL_LIBRARY_DIR = $(MSDESIGN)CADD\Geopak\Sheeting\Sheet Cells\\
   #---- Location of Geopak Plan and Profile Sheeting Cell Libraries       ----#

GPK_SHEETCLP_SHEET_LIBRARY_DIR = $(MSDESIGN)CADD\Geopak\Sheeting\SheetLibs\\
   #---- Location of Geopak Plan and Profile Sheet Libraries               ----#

GPK_SHEETCLP_SHEET_LIBRARY_NAME = DsnSheetLibEng3000old.psl
   #---- Name of default Geopak Plan and Profile Sheet Library             ----#

GPK_SUPER_PREFDIR = $(MSDESIGN)CADD\Geopak\Superelevation\\
   #----  Location of Superelevation preference files                      ----#

GPK_SUPER_EDIR = $(MSDESIGN)CADD\Geopak\Superelevation\\
   #----  Location of Superelevation E Table files                         ----#

GPK_SUPER_LENGTHDIR = $(MSDESIGN)CADD\Geopak\Superelevation\\
   #----  Location of Superelevation Length Table files                    ----#

GPK_SURVMNGR_SMDFILE = $(MSDESIGN)CADD\Geopak\SMDFiles\CogoVisualization.smd
   #----  Location of Survey Manager database                              ----#

GPK_TABLES_RTRFILE = $(MSDESIGN)CADD\Geopak\Tables\Tables.rtr
   #----  Location and name of the default Geopak Tables file              ----#

GPK_TYPICAL = $(MSDESIGN)CADD\Geopak\Criteria\Typicals\\
   #----  Location of Critiera file Typicals                               ----#

GPK_XS_SHEET_LIBRARY_DIR = $(MSDESIGN)CADD\Geopak\CrossSections\\
GPK_FORCE_XS_SHEET_LIBRARY_DIR = 1
   #----  Location of the Cross Section Sheet Libraries	(Added 8-5-05)     ----#

GPK_XS_SHEET_LIBRARY_NAME = English1to1.xssl
   #----  Default XS Sheet Library Name (Must be set so that local file	   ----#
   #----  geopak\bin\default.xssl is not loaded - Added 8-5-05)            ----#


%level 4

MS_MDLAPPS < $(MSDESIGN)CADD\MicroStation\MDL\\
   #----  Prepends the path for Office of Design specific MDL applications ----#