Method and CADD memos
Updated October 30, 2009These memos are the latest updates to the design manual.
The memos will be incorporated into the design manual commentary sections. After the updated commentary sections are included on the policy page, the memos will be deleted from this table.
CADD bridge standard plan files and design manual and commentary disclaimer
Methods Memos
| Number | Date | Subject |
|---|---|---|
| MM17 | 9/24/03 | Lighting on Bridges |
| MM29 | 9/24/01 | Calculations for Excavation Classification Line |
| MM88 | 1/26/04 | Rodent Guards on Cantilever Sign Supports and I-235 Overhead Trusses |
| MM96 | 10/6/04 | Revised Culvert Wall Thickness |
| MM119 | 3/3/06 | Access for Dynamic Message Signs |
| MM122 | 4/10/06 | Sealing of Bridge Plans |
| MM125 | 12/6/05 | New Issue Precast Culvert Standards and Plan Development |
| MM148 | 8/17/06 | Review of Existing Sign Truss for Larger Sign Areas |
| MM152 | 8/17/06 | Maximum Joint Openings for Bell Joints |
| MM169 | 4/1/08 | Revision to Section 4.2, Culverts Without Fill |
| MM191 | 3/1/08 | Vent Hole Layout for Flowable Mortar Placement |
| MM201 | 12/1/08 | Policy Guidelines and Standard Sheet 1067 for Overpass Projects Involving the BNSF and UP Railroads |
| MM211 | 9/1/09 | Office Guidelines for Mass Concrete |
| MM219 | 9/1/09 | Guidelines for Signature Blocks when Using Standard Bridge Plans |
CADD Memos
| Number | Date | Subject |
|---|---|---|
| M0053 | 2/1/08 | New LRFD Designed Bulb Tee B (BTB, 4750-4767) and Bulb Tee E (BTE, 4770-4790) Beam Standards and 1036BTBR, 1036BTBW, 1036BTER, and 1036BTEW Steel Intermediate Diaphragms |
| M0054 | 2/1/08 | New Superstructure and Integral AbutmentStandards for Use With the Prestressed Bulb Tee Beams, 2078BTB-2091BTE, 4380-BTB-4 through 4385-BTE-6, 4500-BTB through 4513-BTE, and 4514-BTB through 4521-BTE |
| M0057 | 3/1/08 | New Abutment and Pier Bearing Detail Standards (4541, 4541A, 4541B, 4541C, 4541D, 4541E, 4541F, 4541G & 4541H) for Use With the A, B, C, D, BTB, BTC, BTD, and BTE Prestressed Beams |
| M0073 | 7/27/07 | CADD Note Test Wells for Nuclear Density Testing |
| M0076 | 7/16/07 | Correction 1017 2099 4514 Standards |
| M0081 | 9/4/07 | Release of Approach Sidewalk Slab |
| M0082 | 9/4/07 | Revisions to Overhead Sign Truss Standards STOH-06 |
| M0083 | 7/31/07 | Release Revision Subdrain Standards |
| M0085 | 10/1/07 | Revision of BTC (4700-4719) and BTD (4730-4748) Prestressed Beam Standards |
| M0087 | 9/4/07 | Revisions to Standard CADD Sheets 4305, 4308, 4309, and 4310 |
| M0088 | 10/1/07 | Revisions to Standard Sheets 1049, 1050 and 1050a |
| M0089 | 11/1/07 | New Rail Standards, 1018C, 1018D, 1020D, 1020E and 1020F; Revision Rail Standards, 1018, 1018A, 1020A, 1020B and 1020C |
| M0090 | 2/1/08 | Revision of the 1017 End Section Barrier Rail Standard and the Voiding of the 1017A End Section Barrier Rail Standard |
| M0091 | 12/1/07 | Revision to J24-06, J30-06, J40-06, and J44-06 Standard Open Rail Sheets |
| M0092 | 5/1/08 | New Standards 1090 and 1091 |
| M0093 | 2/1/08 | New Standards 1065 and 1066 |
| M0094 | 1/1/08 | Revision to the 1036, 1036CR, 1036CW, 1036DR, and 1036DW |
| M0095 | 2/1/08 | New Wing Standards 2110, 2111, 2112, 2112-S, 2113, 2113-S, 2114, 2114-S, and 2115 |
| M0096 | 7/1/08 | Release of Superstructure and Stub Abutment Standards for Use with the Bulb Tee Beam Standards |
| M0097 | 2/1/08 | Revision of A, B, C, and D Prestressed Superstructure and Integral Abutment Standards, 2078-2084, 2085-2091, 4500-4513, and 4514-4521 |
| M0098 | 3/1/08 | Revision of A, B, C, and D Prestressed Superstructure and Stub Abutment Standards 2092-2098, 2099-2105, 4542-4548, and 4549-4552; and New Standards 2106-2109 |
| M0101 | 2/1/08 | Correction of BTC and BTD Beam Standards 4700, 4719, (1 of 2), 4730, and 4748 (1 of 2) |
| M0102 | 3/1/08 | Correction of CBJ 1-87, CBJ 2-87 and CBJ 3-87 Culvert Bell Joint Standards |
| M0103 | 3/1/08 | Voided 72 in (1800 mm) Bulb Tee Standards 4650-4659 and Intermediate Diaphragm Standards 1036BR and 1036BW |
| M0104 | 3/1/08 | Revision of 1008, 1009, and 1010 Bearing Standards |
| M0105 | 3/1/08 | Correction of 1005, 1005A, 1006, 1006A, 1006B, 1006C, 1006D, 1006E, 1007D, and 1007E Standards |
| M0106 | 4/1/08 | Correction to Standard Sheet 4750 |
| M0107 | 5/1/08 | Correction of 1007D and 1007E Standards |
| M0108 | 5/1/08 | Correction of Deck Rail Standards |
| M0109 | 5/1/08 | Correction of Integral Bridge Standards |
| M0110 | 5/1/08 | Correction of BT Integral Bridge Standards |
| M0112 | 6/1/08 | Corrections of the English Precast Culvert Standards |
| M0114 | 5/1/09 | Correction to Standard Sheet STOH-15-06, Overhead Sign Truss Footing Details |
| M0115 | 6/1/08 | Correction to Standard Sheet 1030As2 |
| M0118 | 7/1/08 | Revision of 2078 to 2091, 4500 to 4506, 4514 to 4521, 4549 to 4552, and 2078-BTB to 2091-BTE, 4514-BTB to 4521-BTE Standards |
| M0119 | 5/1/09 | Revision of the English Bridge Standards - Beams 4600 to 4602, 4610-4612, 4621, 4622, and 4623 |
| M0120 | 10/1/08 | Revision of 1049, 1050A, 1056, and 1058 TBR Standards |
| M0121 | 1/1/09 | Revision of Culvert Standards |
| M0122 | 10/1/08 | Correction of English Bridge Standards 1036-BTBW, 1036-BTER, 1036-CW, and 1036-DW |
| M0123 | 10/1/08 | Correction of the English Bridge Integral Abutment Standards 4380-BTB-4 through 4385-BTE-6 and English Bridge Stub Abutment Standards 4556-BTC-4 through 4561-BTE-6 |
| M0125 | 10/1/08 | Revision of 1038, 1043(1043s1), 1080, M1080, and 1031T English Standards/Release of 1043s2 |
| M0127 | 4/1/09 | Revision of Standard Sheet 1007C |
| M0128 | 11/1/08 | Revision to J40-06 and J44-06 CCS standards |
| M0129 | 11/1/08 | Revision to 1026 - F-shape Expansion Device Details Steel Extrusion with Neoprene Gland |
| M0130 | 11/1/08 | Correction to Beam Standards 4784, 4787, 4789, 4790 |
| M0131 | 12/1/08 | Corrections of J40-06 and J44-06 Continuous Concrete Slab Standards |
| M0132 | 12/1/08 | Revision of J24-06 and J30-06 Continuous Concrete Slab Standards |
| M0133 | 1/1/09 | Correction to 4561-BTC-6 Standard |
| M0135 | 1/1/09 | Release of New P10L Pile Standard |
| M0136 | 4/1/09 | Release of Standard Sheet 1068 |
| M0137 | 4/1/09 | Revision to1043s2, 1044 for Culvert Extensions and 1070 to 1076 for Flume Standards |
| M0138 | 3/1/09 | Revision to J24-06, J30-06, J40-06, and J44-06 Continuous Concrete Slab Standards |
| M0139 | 4/1/09 | Release of Cantilever Sign Truss Standards |
| M0141 | 4/1/09 | Revision to J44-01-06 Standard |
| M0142 | 5/1/09 | Revision to English Bridge Standards 1007D and 1007E |
| M0143 | 5/1/09 | Revision to Standard Sheets 5558, 5560 and 5561 |
| M0144 | 5/1/09 | Revision to English Bridge Standard 4305A |
| M0145 | 5/1/09 | Correction to English Culvert Standard 1043s2 |
| M0146 | 7/1/09 | Revision to P10A and P10L Bridge Standards |
| M0147 | 5/1/09 | Revision to English Flume Standards FBJ-01-04, FBJ-02-04 and FBJ-03-04 |
| M0149 | 7/1/09 | Revision to English Bridge Standards 1008, 1009, 1010, 4541, 4541A, 4541B, 4541C, 4541D, 4541E, 4541F, 4541G and 4541H |
| M0151 | 10/1/09 | Correction to Triple Culvert Headwall Standard TRH45-01-01 |
| M0154 | 7/30/09 | Revision to J24-06, J30-06, J40-06 and J44-06 Continuous Concrete Slab Standards |
| M0155 | 8/1/09 | Revision to English Bridge Standards 4600, 4610, 4620, 4621, 4630, 4632, 4636, 4700, 4703, 4705, 4706, 4719s1, 4730- 4734, 4748s1, 4750, 4752, 4753, 4763-4765, 4770s1, 4770s2, 4771-4773, 4781, 4782, 4784, and 4790s1 |
| M0156 | 8/1/09 | Revision to English Bridge Standards 1010, 4541C, 4541D, 4541E, 4541F, 4541G and 4541H |
| M0157 | 10/1/09 | Revision to English Bridge Standards Series H40-06 |
| M0158 | 10/1/09 | Revision to English Precast Culvert Standards 1081 and 1084 |
| M0160 | 10/1/09 | Revision to English BT Intermediate Diaphragm Standards 1036-BTER & 1036-BTEW |
| M0162 | 10/1/09 | Revision to Foreslope Protection Standards |
| M0163 | 11/1/09 | Revision to English Bridge Standards Series H44-07 |
| M0164 | 11/1/09 | Correction to English Bridge Standards 1036-BTER and 1036-BTEW |
| M0168 | 11/1/09 | Revision to P10A and P10L Bridge Standards |
| M0170 | 11/1/09 | Revision to 1090 Standard |
